Gobi 70 Rust Fire Pit

For longevity, we recommend to store your fire pit under cover or out of the elements when you’re not using it. This will increase the lifespan of your fire pit.

The use of a fire pit cover will also increase longevity and provide additional resistance from the elements including rain and the sun.

Backyard fire pit usage is legal as long as you follow the laws and regulations in your state. The fire pit should not stand closer than 4 metres from a timber wall, and you should ensure that the smoke emissions do not annoy your neighbours. 

Our steel fire pits should only be placed and used on heat resistant surfaces – our recommendations include gravel, crushed rock, sand, brick or clay pavers.

We do not recommend placing your fire pit directly on concrete, grass, wood, composite decking, ceramic or porcelain tiles, due to the base of the fire pit generating high heat levels, and being in direct contact with these materials can affect the condition of the surface beneath.

If your desired fire pit area includes concrete flooring, we would suggest adding an additional heat resistant layer between the fire pit and concrete such as brick or clay pavers.

Your rust fire pit will continue to naturally weather into its durable rustic finish. We do recommend keeping your rust fire pit away from surfaces that may be affected by rust staining, and using on a raised surface eg concrete pavers, to protect your decking or tiles from rust. 

Your black fire pit is finished with a high temperature black painted surface that is resistant to heat but not water. If left uncovered in the elements, it will age to a natural rust finish over time and stabilise, requiring no further maintenance. Some people love the fact that their black fire pit will go through a gradual phase of rusting, this can make a great looking addition to your space. If you would prefer that your fire pit stays its beautiful sleek black, you can rub back the surface and apply a coat of heat resistant potbelly black paint each season to keep it looking its best! 

For longevity, we recommend to store your fire pit under cover or out of the elements when you’re not using it. This will increase the lifespan of your fire pit. 

Begin by placing tinder in the centre of the empty fire pit, and then add kindling on top – the two most popular stacking methods are either a traditional “Tee-pee” shape, or alternatively, a “Jenga” style tower. Regardless of which method you use, it is important to ensure you leave adequate gaps to allow good air flow.

Add the firelighter to the tinder pile, and use matches or a lighter to light and leave for a few minutes to allow it to catch. Once the kindling has also ignited, you can now start adding in your firewood to the stack. It is advisable to only add a few smaller pieces of firewood at this point to allow the wood to catch the fire, and gradually add more as needed once the fire has some momentum.

A poker can be used once the fire is established to move the wood around and allow you to safely stoke the fire.

It is advised to gradually let the fire die down approximately an hour before you are wanting to put it out. Using a poker or a large stick, spread the ashes throughout the fire pit to allow them to cool, and start extinguishing the embers. From this point, you can use a shovel to add sand or dirt to the fire pit and mix through with the poker/stick to extinguish the last remaining embers. This method is preferred as there is no sudden change in temperature to the steel.

If you have no sand or dirt available, you can use your garden hose if it comes with a spray setting. While this is not the preferred method of extinguishing a fire, if using water you must take extra care as any hot firewood in the firepit can give off high levels of steam once it comes in contact with the water, which may cause injury.